Provide the best powder coating system solution
As we all know, the most important part of the environmental protection spray equipment process is powder spraying. The industry uses high-pressure electrostatic spray guns for coating. The powder coating is sprayed by electrostatic spray guns to become negatively charged particles. Under the action of static electricity, it is adsorbed to the belt. The positively…
Nowadays, coating equipment is widely used in the modern application of the coating industry. Many spray processing manufacturers choose the spraying equipment because their performance and scope of application are not very clear. For this Hebei Hanna Technology has compiled some information to share with everyone, hope It is helpful to you. First, practicality: the use of…
Various problems often occur in the application process of loading production lines. Below, Hanna Technology will give you a general analysis: Improper design of conveying equipment: From the design point of view, there are many ways to convey the workpiece. If the design is not proper, it will easily have adverse consequences for production capacity,…
It is said that electrostatic powder coating is better, where is it better? Below Hanna Technology to analyze for everyone! First, electrostatic powder coating molding has excellent film properties: as long as the powder coating is directly powder coatinged onto the surface of the pre-treated MDF sheet, after baking, a coating film surface having excellent…
Spraying equipment plays a big role in our lives. What problems should we pay attention to when using spray equipment? Let’s discuss it together. 1. According to actual needs, such as the size, shape, daily output and other parameters of the target workpiece, select the most suitable electrostatic spray gun spraying process plan. 2. Calculate and…
In the spraying project, the surface of the spray fan should be perpendicular to the surface of the coating. When the gun is manually operated, the width of each spray gun should not be too large. Otherwise, the coating will be uneven. The direction of the spray gun should always be parallel to the surface…
Spraying equipment is more and more widely used in people’s lives. For the industry that uses electrostatic spraying equipment, the color of the product is different. It is difficult to change another color in a few days or a few hours. At the same time, it is necessary to clean the spray booth and recycle…
A set of painting lines is generally composed of five parts, namely pre-treatment system, painting equipment, chain conveyor system, drying tunnel and motor control system. These five parts are interlocking, and any part of the problem will affect the quality of production. Hannah Technology combines years of experience to give you a few notes and…
The focus of metal powder coatings is to control the uniformity of color. Metal effect pigments are easily separated from powder particles during spraying. Even if the powder is bonded, it is difficult to achieve 100% adhesion of the metal effect pigments to the powder particles. Therefore, it is necessary to control the process to…
Introduce the design requirements of the leveling spray booth Speaking of the spray booth, everyone may be familiar, but there are several classifications in the spray booth. Below, Hanna Technology will introduce the design requirements of the leveling spray booth. 1.The electrical performance classification of the closed flow chamber shall comply with the provisions of…