Skip to content
FacebookLinkedinTwitterGoogle+Instagram
Hanna Technology
Hanna Technology
Powder Coating Line | Paint Spraying Equipment

Provide the best powder coating system solution

WahtsApp:+86 186 3213 8668sales@powderspraymachine.com
keywords
  • Home
  • About Us
    • About Us
    • Factory Show
    • Cooperation Customers
  • Products
    • Powder Coating Line
      • Automatic Powder Coating Equipment
      • Manual Powder Coating Line
      • Power And Free Powder Coating Line
    • Powder Coating (Painting) Robot
      • Drag Teaching Programming Robot
      • Visual Automatic Programming Robot
    • Pretreatment System
      • Online Spray Pretreatment
      • Dip Tank Pretreatment
    • Powder Coating Booth
      • Fast Color Change Booth
      • Filter Recovery Powder Coating Booth
    • Powder Coating Oven
      • Camel Back Curing Oven
      • Tunnel Powder Coating Oven
      • Batch Powder Curing Oven
    • Conveyor Chain
      • Automatic Conveyor
      • Power And Free Conveyor
      • Manual Conveyor System
    • Electrical Control System
    • Manual Powder Coating Machine
    • Liquid Painting Line
    • Powder Dip Coating Line
    • Powder Coating Powder
    • Powder Coating Machine Parts
  • Application
  • Service and After Sales
    • Service and After Sales
    • Quality Assurance And Service Content
  • Video
  • News
  • Contact
Hanna Technology
  • Home
  • About Us
    • About Us
    • Factory Show
    • Cooperation Customers
  • Products
    • Powder Coating Line
      • Automatic Powder Coating Equipment
      • Manual Powder Coating Line
      • Power And Free Powder Coating Line
    • Powder Coating (Painting) Robot
      • Drag Teaching Programming Robot
      • Visual Automatic Programming Robot
    • Pretreatment System
      • Online Spray Pretreatment
      • Dip Tank Pretreatment
    • Powder Coating Booth
      • Fast Color Change Booth
      • Filter Recovery Powder Coating Booth
    • Powder Coating Oven
      • Camel Back Curing Oven
      • Tunnel Powder Coating Oven
      • Batch Powder Curing Oven
    • Conveyor Chain
      • Automatic Conveyor
      • Power And Free Conveyor
      • Manual Conveyor System
    • Electrical Control System
    • Manual Powder Coating Machine
    • Liquid Painting Line
    • Powder Dip Coating Line
    • Powder Coating Powder
    • Powder Coating Machine Parts
  • Application
  • Service and After Sales
    • Service and After Sales
    • Quality Assurance And Service Content
  • Video
  • News
  • Contact

Explain the advantages of the powder spray room in environmentally friendly spray equipment

As we all know, the most important part of the environmental protection spray equipment process is powder spraying. The industry uses high-pressure electrostatic spray guns for coating. The powder coating is sprayed by electrostatic spray guns to become negatively charged particles. Under the action of static electricity, it is adsorbed to the belt. The positively charged workpiece goes up.

At the time of dusting, about 60% of the powder is directly applied to the workpiece, and the remaining 40% of the powder will fall into the dusting room. This part of the powder is called recycled powder. In the production of powder spray in the spray production line, a large amount of recycled powder will be produced. How to carry out timely and effective recirculating operation of the recycled powder, it is essential to select a suitable recycling powder room.

In order to meet the requirements of producing multi-color powders, it is necessary to change colors frequently during dusting. To change the color, it is necessary to clean the powder room to prevent powder cross-contamination. The cleanliness and time of cleaning the powder room are directly related to the quality and efficiency of the powder spraying.

When replacing the single-stage recycling powder room, it is necessary to manually clean the powder tube, powder pump, powder cabinet and spray gun, which is inefficient. It takes 30 minutes to change the powder near the color. It takes more than 1 hour to change the powder with different color. At the same time, due to frequent cleaning and disassembly of the filter paper filter, the filter life is only 3-6 months, and the material consumption is large.

The large cyclone recycling powder room has a high degree of automation, and the powder room can be automatically cleaned when changing colors. It takes only 5 minutes to change the powder of similar color, and it takes 10-15 minutes to change the powder with large contrast color.

Through the above analysis, the large cyclone recycling powder room manufactured by Hanna Technology has high powder spraying quality, good dusting environment and short powder replacement time. Compared with the recycling powder room on the market, it has great advantages. Welcome to inquire.

Share this page
Share with PinterestShare with LinkedInShare with FacebookShare with Twitter

Post navigation

PreviousPrevious post:Precautions in electrostatic spray gun operationNextNext post:Do you know the details of the need to pay attention to the purchase of spray equipment?

From the Same Category

Reasons and treatment of powder coating powder drop phenomenon after coating
2022年2月17日
Technical requirements of powder coating for electrostatic spraying process
2022年2月16日
Safety management of electrostatic spray gun spraying
2022年2月15日
Powder Coating powder
Powder coating and its precautions
2021年10月19日
Problems to be noted in the powder coating booth
2021年10月18日
Heat calculation for powder coating oven
2021年10月14日
Products Category
  • Powder Coating Line
    • Manual Powder Coating Line
    • Automatic Powder Coating Line
    • Power And Free Powder Coating Line
  • Powder Coating Painting Robot
    • Drag Teaching Programming Robot
    • Visual Automatic Programming Robot
  • Pretreatment System
    • Online Spray Pretreatment
    • Dip Tank Pretreatment
  • Powder Coating Booth
    • Fast Color Change Booth
    • Filter Recovery Powder Coating Booth
  • Powder Coating Oven
    • Camel Back Powder Coating Oven
    • Tunnel Powder Coating Oven
    • Batch Powder Curing Oven
  • Conveyor System
    • Automatic Conveyor
    • Power And Free Conveyor
    • Manual Conveyor System
  • Electrical Control System
  • Manual Powder Coating Machine
    • Powder Coating Machine Parts
    • Powder Coating Gun
  • Powder Dip Coating Line
  • Liquid Painting Line
  • Powder Coating Powder
Hebei Hanna Technology Co.,Ltd
  • Telephone
    +86-311-85290395
  • WhatsApp
    +86 18632138668
  • Email
    sales@powderspraymachine.com

Find us on:

Mail
Recent Articles
  • How to design line speed according to production capacity ?
    2021年5月24日
  • Choosing The Right Powder Coating System
    2021年5月18日
  • Reasons and treatment of powder coating powder drop phenomenon after coating
    2022年2月17日
  • Technical requirements of powder coating for electrostatic spraying process
    2022年2月16日
  • Safety management of electrostatic spray gun spraying
    2022年2月15日
  • Powder Coating powder
    Powder coating and its precautions
    2021年10月19日
  • Problems to be noted in the powder coating booth
    2021年10月18日
  • Heat calculation for powder coating oven
    2021年10月14日
Main Products

Powder Coating Line

Paint Spraying Equipment

Pretreatment System

Powder Spraying Room

Conveyor Chain

Curing Heating System

Contact Us
  • Phone:
    +86-311-85290395
  • Mobile / WhatsApp
    008618632138668
  • Email
    sales@powderspraymachine.com

Find us on:

FacebookTwitterGoogle+YouTubePinterestFoursquare





    © Hebei Hanna Technology Co.,Ltd. 2018. All rights reserved.