A set of painting lines is generally composed of five parts, namely pre-treatment system, painting equipment, chain conveyor system, drying tunnel and motor control system. These five parts are interlocking, and any part of the problem will affect the quality of production. Hannah Technology combines years of experience to give you a few notes and hopes to help your production.
The spray booth in the paint line is painted in a sealed room with air filtration.
First note on the use of spray booths:
1.It is necessary to check whether the air pressure of the spray is normal before spraying, and to ensure that the filter system is clean;
2. Check the air compressor and the oil-water micro-dust separator to keep the paint hose clean;
3.Spray guns, paint hoses and paint tanks should be stored in a clean place;
4.Except for dust removal with a blow gun and a sticky cloth, all other pre-spraying procedures should be completed outside the paint booth;
5. In the paint booth, only the spraying and baking process can be carried out, and the paint room door can only be opened when the vehicle enters and exits. When opening the door, the air circulation system must be activated to create a positive pressure to ensure that dust outside the room cannot enter the room.
6.Must wear the specified spray paint and wear safety equipment to enter the paint booth for operation;
7.When baking work, the flammable items in the paint booth must be taken out of the house;
8.Non-essential personnel are not allowed to enter the paint booth.
9.Since the painting equipment is placed in the spray booth, its safe use is also essential. Here are some points to note:
10.Implementing a person responsible for opening and closing the tour;
11.Check and maintain everyday to avoid accumulation of dust and paint dust and affect the use of equipment;
It must be done according to the design requirements during installation, to avoid arbitrarily changing the drawings to ensure the installation quality of the paint equipment;
12 The filter and paint mist purifier of the exhaust system should be cleaned regularly to prevent damage to the operating environment of the system. It is necessary to establish a sound maintenance system and set up a dedicated operation.
The above is the need to pay attention to the use of the paint line, I hope to help your work, if you have other questions about painting equipment, you can also consult us.