The problem with the spray gun of the painting equipment is generally that after the spray gun is used, there is no immediate cleaning of the spray gun and the attachment of the spray gun to cause malfunction. So how do you clean the spray gun?
Let Hanna Technology introduce it to you.
When cleaning the suction feed gun,
First remove the paint cans first.
Flow the suction tube into the cup,
Then release the air cap 2-3 turns,
Block the air cap with a folded rag.
Then pull the trigger.
This allows the paint in the gun to flow back into the paint can.
Tighten the air cap from the beginning,
And the paint in the paint can is poured back into the original large tank.
Clean the inside of the cup and the lid with a solvent and a thin brush.
Wipe off the residue with a cloth dipped in solvent.
Then pour a small amount of clean detergent into the cup.
Pull the trigger to spray the cleaner and clean the delivery tube.
Then remove the air cap,
Soak in a thinner or solvent,
Clean the blocked holes with a soft brush like a round-headed toothbrush or a straw broom.
Remember, you can’t sort these holes with something like wire or nails.
Because these holes are all drilled.
Clean the nozzle with a spray gun and solvent.
Wipe the outside of the gun body with a rag that has been soaked in thinner.
Be careful to wipe off any traces of paint.