Provide the best powder coating system solution
When a coating is applied to the surface of a workpiece of various materials, the coating to obtain a good atomization depends on many factors. Coatings, spray gun selection and spray techniques are undoubtedly important. A thorough understanding of the spray tool, the air atomizing spray gun, is the best way to achieve high quality…
DetailsPainting and dusting are two completely different coating methods. Painting is the use of compressed air to disperse liquid paint (commonly known as paint dispersed into paint mist particles adhered to the surface of the object to be coated, while dusting is done by means of compressed air arch powder The particles dispersed into the…
Details1. Adopt manual and no-line painting method: Zhongyuan Coating Recommendation: Put the sprayed product in a dust-free environment for 5~10 minutes (this is called cold flow) and then put it into the fixed oven for baking. Generally, the ordinary one-component paint is baked. In about 15 minutes, the two-component paint should be baked for 30~45…
DetailsIn the era of information explosion, with the rapid development of plastic spray equipment and the rising labor costs, automatic spray equipment has gradually become the development trend of the spray industry. But when there are some mechanical failures after using the spray line equipment for a long time, how should these mechanical problems be…
DetailsWith the development of technology, the automation of the manufacturing industry is getting higher and higher, and the spray plastic industry is no exception. The equipment that Xin Xiaoyue said today is a lot of application fields of spray line equipment. This equipment is mainly for metal surfaces. The coating process can spray and spray…
DetailsBecause the wastewater produced by the spray equipment in the production process has the characteristics of complex composition, unstable water quality, poor biodegradability and differences in coating process, it is difficult to handle it. The current research is mainly in the development of joint treatment process. In the industrial application, the main treatment process is…
DetailsAccording to the statistics of Hanna’s customer service staff, the quality problems of the plastic products that the customer cares about in the purchase of plastic spray equipment, for example, how to solve the shrinkage phenomenon during the spray process? Hanna Technology’s 28 years of production experience lists the main causes and solutions for shrinkage…
DetailsAccording to the statistics of Hanna’s customer service staff, how can the customer solve the problem of the quality of the sprayed plastic products in the spray equipment, such as the edge exposure during the spray process? Hanna Technology’s 28 years of production experience lists the main reasons and solutions for the edge of the…
DetailsIn recent years, with the rapid development of the domestic hardware industry and the increasing demand for hardware production in foreign countries, as the auxiliary and supporting projects for the production of the main engine – the spray plastic industry has also ushered in new development opportunities, and in my In the production and manufacture…
DetailsAccording to the statistics of Hanna’s customer service personnel, how can customers solve the problem of the quality of the sprayed products that they care about in the spray equipment, such as the partial or large-area peeling of the workpiece during the spray process? Hanna Technology’s 28 years of production experience lists the main reasons…
Details