Efficient spray tools are especially important for paint technicians. HVLP/RP environmentally friendly paint/saving paint high efficiency K3 series high load pressure feed type top paint spray gun, mainly used with double diaphragm pump and paint pressure tank connection, with long-time high load production characteristics, very suitable for spraying production line. Such as: automotive OEM coating line, bus production plant, large-area industrial spraying and large-area spraying of high-tech nano materials.
Good spray is the perfect combination of spray equipment and spray technology. To maximize the function and performance of the spray gun:
- Adjust the optimal spray pressure according to different atomization technology spray guns;
- Adjust the flow rate of the paint to the maximum. If the amount of paint is too large, try not to move the needle too far to avoid premature wear of the needle;
- When spraying with a spray gun, the hood of the spray gun should be perpendicular to the surface of the workpiece to be sprayed;
- When the spray gun moves, its trajectory should be parallel with the sprayed surface. Depending on the spray gun, the spray distance is different.
- When spraying, the whole arm moves through the surface of the workpiece to keep the wrist straight and can not be operated as an arc track, so as to avoid uneven film color and coating thickness;
- Trigger the spray gun after each spraying stroke starts, and release the spray gun trigger before the end of each spraying stroke;
- Depending on the type of paint, the overlap range of the spray width is 1/3-1/2;
- Depending on the type of paint, the speed of the spray gun is 30-50 cm per second to obtain the best film thickness.
