For manufacturers specializing in spray processing, in addition to improving the process, it is necessary to improve the spraying equipment. In the daily spraying process, many problems are caused by improper use of equipment or technology. Below, Hannah Technology will analyze what happens when the equipment is not perfect.
The reason why the sprayed processed products are not up to standard is that from the perspective of the equipment, there may be a design that does not take into account the special requirements of the hanging method, the hanging pitch, and the horizontal turning; from the technical point of view, it is possible that during the spraying process Factors such as scrap rate and production capacity are not taken into account.
In the case of insufficient processing time, some spray processing plants have to reduce the cost of the process in order to reduce the cost of the process. If the time is not up to the standard, there will be different consequences. For example, if the total processing transition time of the spraying process is insufficient, it may cause stringing; if the curing time is insufficient, there will be defects of poor curing; and the film flow may be caused by insufficient spraying leveling time. The flat effect is not good.
The improper performance of the sprayed processing equipment design, it may cause the poor processing results can be regarded as improper design, for the hanging chain conveyor commonly used in spray processing, its load capacity, traction capacity, chain The speed and so on have strict requirements, if it does not match the process, it will have adverse consequences.
Spraying processing equipment is not properly selected, and the requirements for different spraying processes are different. Therefore, the selection of construction equipment should be targeted, and scientific and reasonable setting of process parameters is required to obtain the desired results.
